iPhone Long Screw Damage Repair

Long screw damage can be caused on many different devices such as the iPhone 5S, iPhone SE, iPhone 6/6S and 7 series. Each model has different locations for possible long screw damage. Depending on the model of the iPhone long screw damage can range in severity from "basic" problems such as no backlight, no service or much bigger problems such as no image, or no boot caused by a 1v8 short.

Read More
iPhone Water Damage Repair

The best thing to do when getting your phone and/or laptop wet is to resist the urge to turn it on. Don't charge it or plug it into anything. Let it dry out and bring it into our repair shop asap. Most commonly people think that rice will save a wet phone, which is a mis-nomer. The real cause is shorts and corrision, rice will never clean corrison.

Read More
Logic Board Micro Soldering Repair Services

With the aide of schematics, board views and donor parts these repairs are often feasible and much cheaper then the alternative which would involve replacing the whole motherboard, which sometimes can compromise the data on the device, rendering the information unreadable.

Read More
iPhone 6S Backlight Repair

Typically for a backlight to go out on the iPhone 6S would be a result of a few things, 1 being liquid damage on the motherboard causing corrosion and shorting out the backlight circuit which contains a diode, a backlight ic (U4020) as well as few other discrete components. Another way a backlight circuit can go out is also by installing a replacement screen and bridging a few of the connectors on the LCD FPC connection thus causing a short and ruining the circuit.

Read More
What is Micro Soldering?

Often times with smaller mobile devices, a need for shrinking the surface mounted components arises. With the smaller components comes smaller tools. Typically working with components on the 0402 scale and even smaller makes using standard tools very difficult. The scale is literally microscopic; components on a board can be smaller than a grain of rice (hence the microscope)

Read More
iPad Mini Digitizer FPC Connector Repair

Repairing an iPad Mini Digitizer and realized the pins had come out of the digitizer fpc connector? No need to worry! This a typical problem faced during ipad mini repairs and here at micro soldering repairs we love this repair! 

In order to repair this we will remove and re-install a new digitizer fpc connector. 

Read More