A flexible printed circuit (FPC) connector is used to connect to circuits together in a device or unit that flexes in a small or confined manner that does not otherwise allow a socketed connection. Often times these connectors are made from a brittle plastic that is not rated for many connects and disconnects, as such they can fail with normal installations. This service is to repair or replace a damaged FPC connector on any device.Read More
The most common use of the micro coax connector is using 2 or more anchor-points which are typically grounded in the circuit then a center pin also known as the "hot wire" is what carries the signal and is mounted to a center point and runs either to other points on the board and/or through a via to connect to another layer.Read More
Repairing an iPad Mini Digitizer and realized the pins had come out of the digitizer fpc connector? No need to worry! This a typical problem faced during ipad mini repairs and here at micro soldering repairs we love this repair!
In order to repair this we will remove and re-install a new digitizer fpc connector.Read More