If the pins are bent, the HDMI is loose or a white light with no video, then the HDMI Port Repair needs to be repaired. Please make sure that the issue is the HDMI port and not the cable. Call us first if you have any questions/concerns.Read More
There can be several problems that lead to the dreaded HDMI port failure. Among these are the port itself (99% of the time it's the port itself...they are made poorly and also soldered poorly out of the box), HDMI filters located near the HDMI port, the Panasonic IC chip also located near the HDMI port (these all work together to give you a picture on you television screen) and/or faulty board wiring.Read More
A charger port is arguably the most used part of a mobile device. This often invites dirt, lint and damage from many repeated connections.
The USB-C interface allows for a more rugged and faster throughput, but is still susceptible to failure, damage and replacement.Read More
One problem known to the Sony Z3V owners is that the micro usb port is often times subject to failure after being plugged in and unplugged many times over the life of the device.Read More
With the aide of schematics, board views and donor parts these repairs are often feasible and much cheaper then the alternative which would involve replacing the whole motherboard, which sometimes can compromise the data on the device, rendering the information unreadable.Read More
This is a common problem of Samsung tablets, the battery connector is prone to cracking causing the flickering screen, random shutdown/restart, quick discharge, battery capacity fluctuation.Read More
Often times the boot looping issue on the LG Nexus 5 is caused by a failing power button which needs to be removed and then replaced with a new one which involves using a hot air station as well as micro soldering techniques.Read More
Often times with smaller mobile devices, a need for shrinking the surface mounted components arises. With the smaller components comes smaller tools. Typically working with components on the 0402 scale and even smaller makes using standard tools very difficult. The scale is literally microscopic; components on a board can be smaller than a grain of rice (hence the microscope)Read More
Repairing an iPad Mini Digitizer and realized the pins had come out of the digitizer fpc connector? No need to worry! This a typical problem faced during ipad mini repairs and here at micro soldering repairs we love this repair!
In order to repair this we will remove and re-install a new digitizer fpc connector.Read More