iPhone 13 Pro & iPhone 13 Pro Max White Screen Repair

When faced with the frustrating issue of a white screen on your iPhone 13 Pro, soldering a wire on the screen can offer an effective solution. The white screen problem is often caused by a loose or damaged connection between the screen and the lcm panel. By carefully soldering a wire to reconnect these components, the electrical connection is restored, allowing the screen to function properly once again. This delicate procedure requires the expertise and precision of a skilled technician to ensure that the soldering is done accurately and without causing any further damage. Once the wire is securely soldered into place, the white screen issue is resolved, allowing you to enjoy your iPhone 13 Pro's vibrant and functional display once again.

backlight, iphone micro soldering, micro soldering repairJordan WiresSeptember 29, 2023iphone 13 pro, iphone 13 pro maxComment

iPhone 12 & iPhone 13 No Power No Service Repair

Do you have an iPhone 12 or 13 Series that no longer turns on, or doesn’t get service and shows SOS?

These are common motherboard issues caused by the compact design of the motherboard, read on to see how the technicians at Micro Soldering Repairs can fix this for you!

iPhone 12 Pro Max 5G Antenna Soldering Replacement

In this repair the flex cable was burned and thus shorting out the power rail causing the phone to not boot. A replacement of the antenna flex that is soldered to the back of the board is required for the device to boot and function properly.

iPhone 11 Backlight Repair

The Apple iPhone 11 utilizes an LCD panel in its design, which means that a high voltage backlight circuit is an integral part of the design to make image on the display visible. Damage to this circuit most often occurs during a screen replacement in which proper precautions are not
taken, particularly if the battery is left plugged in when the screen is removed or connected to the logic board of the device. There is a chance that if the battery is left plugged in, a resistor on the logic board will be damaged, causing the backlight circuit to malfunction.

Recommended Professional Soldering Equipment

Here at Micro Soldering Repairs we have serviced thousands of devices over 5 years and have found the best soldering equipment for all budgets. On this page you will find different options for your next soldering setup.

iPhone X,XS,XR Ear Speaker Soldering Repair

Having ear speaker sound problems on your iPhone model X/XS/XR/XS Max, have our trained technicians take your device in to perform a ear speaker replacement soldering service. Contact us today!

As part of the iPhone X series and up Face ID biometrics now locks the front facing hardware to the motherboard which limits the options of replacement parts and repairs. For any replacements on the front ear speaker flex cable this would result in a loss of the Face ID function feature.

Something as simple as the ear speaker being damaged from water or technician damage would typically render the Face ID to fail if the whole flex cable assembly was replaced.

iPhone 7 no sound motherboard repair service

We've discovered a "signature fault" in the iPhone 7 series which results in no audio meaning no sound from the ear speakers, loud speakers or microphones. Occasionally this also triggers boot-loops, which is when the phone tries to turn on a fails the hardware check which causes the phone to reboot for an extended period of time.

iPhone Long Screw Damage Repair

Long screw damage can be caused on many different devices such as the iPhone 5S, iPhone SE, iPhone 6/6S and 7 series. Each model has different locations for possible long screw damage. Depending on the model of the iPhone long screw damage can range in severity from "basic" problems such as no backlight, no service or much bigger problems such as no image, or no boot caused by a 1v8 short.

FPC Connector Repair

A flexible printed circuit (FPC) connector is used to connect to circuits together in a device or unit that flexes in a small or confined manner that does not otherwise allow a socketed connection. Often times these connectors are made from a brittle plastic that is not rated for many connects and disconnects, as such they can fail with normal installations. This service is to repair or replace a damaged FPC connector on any device.

ipad mini repairs, iphone micro soldering, micro soldering repairJordan WiresNovember 24, 2017Wires ComputingfpcComment

Testing for Tristar charging issues

In order to determine if the Tristar IC is functioning properly, test the voltage of the battery terminal--after you confirm that the phone is pulling amps using the ammeter

iPhone 6S Plus Half Backlight Repair

Typically we see iPhone 6 Plus and iPhone 6S Plus with a half backlight due to the phone needing not one but two anode backlight circuits. With one anode backlight gone out it effectively shuts off half of the led light strip in the backlight panel.

Logic Board Micro Soldering Repair Services

With the aide of schematics, board views and donor parts these repairs are often feasible and much cheaper then the alternative which would involve replacing the whole motherboard, which sometimes can compromise the data on the device, rendering the information unreadable.

iPhone Pry Damage Repairs

The most common DIY mistake when replacing a battery is prying up on the board-side and breaking the connection of many small capacitors and inductors which are needed for the phone to boot properly. The repair invovles replacing the missing components to allow the phone to charge and boot as required.

iPhone 6S Backlight Repair

Typically for a backlight to go out on the iPhone 6S would be a result of a few things, 1 being liquid damage on the motherboard causing corrosion and shorting out the backlight circuit which contains a diode, a backlight ic (U4020) as well as few other discrete components. Another way a backlight circuit can go out is also by installing a replacement screen and bridging a few of the connectors on the LCD FPC connection thus causing a short and ruining the circuit.

iPhone 6 Backlight Repair Service

A blown back light on an iPhone 6 is typically caused by a screen replacement gone wrong or a sudden drop on the phone which can damage some of the components on the backlight circuit.

Lets take a look at the back light circuit and evaluate the possible issues and solutions to this problem.

iPhone 6 stuck searching no service

The issue with the no service problem is that you cannot simply replace the Intergrate Chip with another one because it is married to the central processing unit (CPU) and the Touch ID controller. [Not to be confused with the Touch IC controller]

What is Micro Soldering?

Often times with smaller mobile devices, a need for shrinking the surface mounted components arises. With the smaller components comes smaller tools. Typically working with components on the 0402 scale and even smaller makes using standard tools very difficult. The scale is literally microscopic; components on a board can be smaller than a grain of rice (hence the microscope)

iPhone 6 Plus Touch Disease Repairs

Do you own an iPhone 6 Plus and suffer from no touch or flashing gray lines? Have you tried to bring your phone to a repair shop and they were unable to fix the problem. The repair process involves disassembling the iPhone and removing the motherboard to access the touch IC's that reside on the back of the logic board.

smd iphone repairs, iphone micro solderingJordan WiresOctober 10, 2016Wires Computingiphone 6 plus, touch ic, touch diseaseComment